Tinxy 6 node smart switch

sometimes, it works as intended. sometimes, it doesn’t.

when i toggle the switches from the app, it doesn’t respond, but after a while the app executes command like commands were queued.

sometimes, the app shows disconnected from wifi. Home Assistant integration also become unavailable at times. After a while, it comes back.

The 6 node smart switch is always powered on and connected to wifi. i did check connected clients in the router settings. The wifi signal remains -40 to -61 as it appears in one of the wifi analyzer apps.

WiFi is not always stable as it seems. lot of routers nearby can interfere with the wifi signal quality. Please

  1. turn off WiFi
  2. make phone hotspot with the same wifi credentials.
  3. keep it close to device , then test the tinxy device.
  4. you should find everyhing working fine.

solution if the above works (any one)
move the antenna on the module to the right direction
move wifi antenna
change wifi
bring the device closer to wifi
Or last (but possible) change device